CHAPTER 11 TROUBLESHOOTING
5. Cleaning the Mirror (No. 5 mirror)
1) Remove the copyboard glass.
2) Remove the lens hood.
3) Remove the mirror guide plate.
4) Move the lens stage in the direction of Enlarge.
5) Remove the screw, and remove the mirror cleaning tool.
6) While butting the mirror cleaning tool
mirror by moving the tool in the direction of the arrow.
At this time, be sure that your finger or the cleaning tool will not touch the No. 4
mirror.
6. Routing the Light-Blocking Belt
11-14
COPYRIGHT © 1997 CANON INC.
Figure 11-213
Light-blocking belt 1
Light-blocking belt 2
Figure 11-214
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
against the No. 5 mirror as shown, clean the
Light-blocking belt 3
Light-blocking belt 4