BMW K 1100 LT/RS Repair Manual page 242

1
33 1 510
4
•
Screw the rear wheel drive centrally with holder,
BMW No. 33 1 510, and bearing journal (1).
•
Screw on locking arm (3).
•
Move threaded bushings (5) into contact with the
rear wheel drive.
•
Secure with wheel bolts (2).
•
Screw the grub screws (4) up until they make
contact.
33.6
120°C
5
2
1
3
RT330350
•
Heat hexagon nut (6) on drive bevel gear to 100
°C and release with 36 mm (1.4173 in) socket
wrench insert and reducing adapter,
BMW No. 33 1 720.
e
Caution:
Never use a hammer to release the hexagon nut,
otherwise the splines can be easily damaged.
•
Remove thrust ring (7).
•
Heat housing to 120 °C and release threaded
ring (8) with pin wrench (2), BMW No. 33 1 700.
•
Heat bearing seat to 120 °C in order to remove
the drive bevel gear (9).
100°C
8
7
6
9
LT330010
33 1 720
33 1 700
RT330360