Device Pop-Up Menu - Cisco WS-C2950-24 Configuration Manual

Chapter 2 Getting Started with CMS

Device Pop-Up Menu

Table 2-11 VSM and Cluster Manager Device Pop-up Menu
Pop-up Menu Options
System
Inventory
IP Management
Software Upgrade
SNMP Management
Console Baud Rate
ARP Table
Save Configuration
System Reload
Device
Cisco Group Management
Protocol (CGMP)
Spanning Tree Protocol (STP)
LRE Profile
78-6511-05
With the exception of the Cluster menu bar options, the VSM and Cluster
Manager device pop-up menu displays all of the configuration and monitoring
windows (Table 2-11) available from the VSM and Cluster Manager menu bar.
To display the device pop-up menu from VSM, click the switch image, and
right-click.
To display the device pop-up menu from Cluster Manager, you can either
Click a specific switch icon from the Cluster Tree, and right-click.
•
• Press the Ctrl key, click the switch icons from the Cluster Tree, and
right-click.
Task
Display the device type, software version, IP address, and other
information about a switch or cluster of switches.
Configure IP information for a switch.
Upgrade the software for a cluster or a switch.
Enter SNMP community strings, and configure end stations as trap
managers.
Change the baud rate for one or more switches.
Manage the Address Resolution Protocol (ARP) table.
Save the configuration on one or all of the cluster switches.
Reboot the software on a switch or a cluster.
Enable and disable CGMP and the CGMP Fast Leave feature on a
switch.
Change STP parameters to prevent network loops.
Display the LRE profile parameters for the Catalyst 2912 LRE and
Catalyst 2924 LRE XL switches, and configure the speed of the
LRE link between an LRE port and a remote CPE.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
Cluster Manager and VSM
2-19