Configuring A Switch For Local Aaa - Cisco WS-C2950-24 Configuration Manual

Chapter 6 Configuring the System

Configuring a Switch for Local AAA

Command
Step 1
configure terminal
Step 2
aaa new-model
Step 3
aaa authentication login
default local
Step 4
aaa authorization exec local
Step 5
aaa authorization network
local
Step 6
username name password
password privilege level
78-6511-05
You can configure AAA to operate without a server by setting the switch to
implement AAA in local mode. The switch then verifies authentication and
authorization. No accounting is available in this configuration.
Beginning in privileged EXEC mode, follow these steps to configure the switch
for local AAA:
Purpose
Enter global configuration mode.
Enable AAA.
Set the login authorization to default to local.
Configure user AAA authorization for all network-related
service requests, including SLIP, PPP NCPs, and ARA
protocols.
Configure user AAA authorization to determine if the user
is allowed to run an EXEC shell.
Enter the local database.
Repeat this command for each user.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
Configuring TACACS+
6-67