Adding A Vlan; List Of - Cisco WS-C2950-24 Configuration Manual

Chapter 8 Configuring VLANs

Adding a VLAN

Command
Step 1
vlan database
Step 2 vlan vlan-id name vlan-name
Step 3 exit
Step 4
show vlan name vlan-name
78-6511-05
Each VLAN has a unique, 4-digit ID that can be a number from 1 to 1001. To add
a VLAN to the VLAN database, assign a number and name to the VLAN. For the
list of default parameters that are assigned when you add a VLAN, see the
"Default VLAN Configuration" section on page
If you do not specify the VLAN media type, the VLAN is an Ethernet VLAN.
Beginning in privileged EXEC mode, follow these steps to add an Ethernet
VLAN:
Purpose
Enter VLAN database mode.
Add an Ethernet VLAN by assigning a number to it. If no
name is entered for the VLAN, the default is to append the
vlan-id to the word VLAN. For example, VLAN0004 could
be a default VLAN name.
If you do not specify the VLAN media type, the VLAN is
an Ethernet VLAN.
Update the VLAN database, propagate it throughout the
administrative domain, and return to privileged EXEC
mode.
Verify the VLAN configuration.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
VLANs in the VTP Database
8-28.
8-33