Disabling A Network Port - Cisco WS-C2950-24 Configuration Manual

Configuring Flooding Controls
Command
Step 1
configure terminal
Step 2 interface interface
Step 3
port network
Step 4
end
Step 5
show running-config

Disabling a Network Port

Command
Step 1
configure terminal
Step 2 interface interface
Step 3 no port network
Step 4
end
Step 5 show running-config
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
7-8
Beginning in privileged EXEC mode, follow these steps to define a network port:
Purpose
Enter global configuration mode.
Enter interface configuration mode, and enter the port to be
configured.
Define the port as the network port.
Return to privileged EXEC mode.
Verify your entry.
Beginning in privileged EXEC mode, follow these steps to disable a network port:
Purpose
Enter global configuration mode.
Enter interface configuration mode, and enter the port to be
configured.
Disable the port as the network port.
Return to privileged EXEC mode.
Verify your entry.
Chapter 7 Configuring the Switch Ports
78-6511-05