Management Vlan - Cisco WS-C2950-24 Configuration Manual

Default Settings
Table 4-2 Default Settings and Where To Change Them (continued)
Feature
Upgrading cluster
software
Configuring SNMP
community strings and
trap managers
Device Management
Switch IP address,
subnet mask, and
default gateway
Dynamic Host
Configuration Protocol
(DHCP)

Management VLAN

Domain name
Cisco Discovery
Protocol (CDP)
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
4-10
Default
Setting Concepts and CLI Procedures
Enabled "Switch Software Releases" section
on page 4-2.
Release notes on Cisco.com
None "SNMP Community Strings" section
on page 5-10
SNMP" section on page
0.0.0.0 "Changing IP Information" section
on page 6-2.
Documentation set for Cisco IOS
Release 12.0 on Cisco.com.
DHCP "Using DHCP-Based
client is Autoconfiguration" section on
enabled page 6-4.
Documentation set for Cisco IOS
Release 12.0 on Cisco.com.
VLAN 1 "Management VLANs" section on
page 8-4.
None "Configuring the Domain Name and
the DNS" section on page
Documentation set for Cisco IOS
Release 12.0 on Cisco.com.
Enabled "Configuring CDP" section on
page 6-22.
Documentation set for Cisco IOS
Release 12.0 on Cisco.com.
Chapter 4
and "Configuring
6-18.
6-8.
General Switch Administration
CMS Option
Cluster Manager
System > Software
Upgrade
Cluster Manager
System > SNMP
Management
Cluster Manager
System > IP
Management
–
Cluster Manager
Cluster > Management
VLAN
Cluster Manager
System > IP
Management
–
78-6511-05