Limitations; Connecting The Stack Ports - Cisco WS-C2950-24 Configuration Manual

Chapter 6 Configuring the System

Limitations

Connecting the Stack Ports

78-6511-05
The following limitations apply to CSUF:
CSUF uses the Gigastack GBIC and runs on all Catalyst 3500 XL switches
•
but only on modular Catalyst 2900 XL switches.
Up to nine stack switches can be connected through their stack ports to the
•
multidrop backbone. Only one stack port per switch is supported.
Each stack switch can be connected to the STP backbone through one uplink.
•
Up to 64 VLANs are supported.
•
A fast transition occurs across the stack of switches if the multidrop backbone
connections are a continuous link from one GigaStack GBIC to another as shown
in Figure 6-8. In addition, follow these guidelines:
• Do not connect alternate stack root ports to stack ports.
Only one stack port is supported per switch.
•
• All stack ports on the stack of switches must be connected to the multidrop
backbone.
• You can connect the open ports on the top and bottom GigaStack GBICs
within the same stack to form a redundant link.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
Configuring STP
6-35