Olivetti OFX 180 Instructions Manual page 38

Call the fax machine with the desired frequency so that the
fax machine detects it. The display shows:
To return the fax machine to the initial stand-by mode.
n o t E
If the fax machine cannot detect that particular frequency, the
display will show the message "RING NOT DETECT.". At
this point, press the
T
O CHANGE THE LENGTH OF THE ACOUSTIC SIGNAL
This function is only enabled in some countries.
When the fax machine is set up for automatic reception
with recognition of the type of call, it behaves as fol-
lows:
• if it is being called by a fax machine, it will automatically
prepare to receive a document after the preset number of
rings
• if it is being called by a telephone, it will emit an acoustic
signal for a time of 20 seconds, after which, if you still have
not lifted the handset, it will automatically prepare to receive
a document.
If you want, you can change the length of the acoustic signal
as follows:
Until the display shows:
The display shows:
Until the display shows:
Press |/} to view the other available values: "15", "30" or
/
"40". For exemple: "40".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O CHANGE THE SILENCE LAPSE
This function is only enabled in some countries.
To change the silence lapse set on your fax machine, pro-
ceed as follows:
Until the display shows:
The display shows:
Until the display shows:
20
key and repeat the procedure.
Press |/} to view the other available values: "3", "4", "8",
/
"10" or "OFF". For exemple: "4".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O CHANGE THE REMOTE CONTROL CODE
If the fax machine is connected to an emergency telephone
that operates in tone dialling mode and is set up for
manual reception or automatic reception with recog-
nition of the type of call, whenever there is a call from a
correspondent wishing to send you a document, you can
set it to receive the document by typing the code
the emergency telephone. This operation has the same
effect as pressing the
You can replace the second "asterisk" of this code using
digits from 0 to 9.
Until the display shows:
The display shows:
The display shows:
Until the display shows:
The display shows:
/ Type the new code, for example: "*8".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
n o t e
If you are connected to a private line, follow the same proce-
dure until the display shows "PUBL.LINE (PSTN)", then press
the |/} keys to display: "PRIV.LINE (PBX)" and then con-
tinue as indicated in the procedure.
* *
on
key on the fax machine.