T
O DISPLAY THE CALLER ID
This function, which may be activated by the telephone company on
request by the user, is only available in some countries and
conforms to the ETSI ETS 300 778-1 standard.
This function tells you immediately who is calling. In this way,
you will be able to decide whether to answer the call or not.
When this function is enabled, if the fax machine is in stand-by
mode, whenever a call is received, it always shows one of the
following items of information:
•
number or name of the correspondent who called you;
•
PRIVATE: if the correspondent has chosen not to reveal his iden-
tity to you;
•
NOT AVAILABLE: if the correspondent is connected to a telephone
exchange that does not support this service.
If you are programming your fax machine and, when an incoming
call is received, want to know who is calling you, you must press
the
key.
It may however happen, if you are connected to a particular kind of
telephone network, that the number of the caller is not displayed on
the fax machine. If this happens, call your local customer engineering
service centre.
T
O CHANGE THE NUMBER OF RINGS
This function is only enabled in some countries.
If set in PHONE/FAX RX reception mode, when an incom-
ing call is received, the fax machine automatically recog-
nizes, after two rings, whether the call is being made from
another fax machine (FAX) or a telephone (TEL).
If you want, you can change the number of rings, as fol-
lows:
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SETU-UP
Until the display shows:
RING COUNT: 02
Press |/} to view the other available values: "01", "03",
/
"04", "05", "06", "07" and "08". For exemple: "04".
To confirm your choice.
To return the fax machine to the initial stand-by mode.