Sending/Receiving A Document In Polling Mode - Olivetti OFX 180 Instructions Manual

T
O SET UP THE AUTOMATIC RESOLUTION
If you do not select the type of resolution before sending a
document, the fax machine will send it automatically with the
default resolution setting (in this case: STANDARD).
If you like, you can set it up and have documents sent
automatically with the FINE resolution, as follows:
Until the display shows:
The display shows:
The display shows:
Until the display shows:
Press |/} to view the other available value: "TX RESOL.
/
FINE".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T /
O ENABLE DISABLE ECM
The ECM (Error Correction Mode) is a system for cor-
recting the errors caused by interference on the line. This
function only has effect if it has been enabled both on your
fax machine and on your correspondent's fax machine and
is indicated by a letter "E" appearing on the display.
The fax machine is set up to send documents in this mode.
However, you can set it up to send documents in normal
mode, as follows:
Until the display shows:
The display shows:
The display shows:
The display shows:
Press |/} to view the other available option: "ECM: OFF".
/
To confirm your choice.
To return the fax machine to the initial stand-by mode.
22
S /
ENDING RECEIVING A DOCUMENT IN POLLING
MODE
F ,
IRST OF ALL WHAT POLLING IS
It is a transmission request that a fax machine makes to another
fax machine so that the latter sends the document requested auto-
matically.
There are two main characteristics of communication using the polling
method:
• the user who is to receive the document requests trans-
mission. In other words, a user may connect to another fax
machine and request it to send a document (specifically prepared)
to him, even when the user at the other end of the line is out.
• the transaction is paid for by the person who requested
transmission (that is, the user who receives the document) and
not the person whose fax machine sends the document.
T
O MAKE A TRANSMISSION REQUEST
Arrange with your correspondent the time at which you
intend to make the transmission request so that he has time
to put the document to be sent in his fax machine. Then set
up your fax machine to receive the document, by program-
ming the dialling mode to be used to call your correspond-
ent and the time at which you wish to receive the document.
Until the display shows:
The display shows:
To confirm the current time or overwrite with the new one,
for example "18:20" and then press the
play shows:
/ Dial the correspondent's number using any of the available
methods: directly on the numeric keypad or using the one-
touch dialling keys or speed dialling codes.
To confirm the setting. The fax machine returns automati-
cally to the initial stand-by status. The second line of the
display shows: "POLL. RX: 18:20".
( )
POLLING RECEPTION
. The dis-