To Set The Date And Time - Olivetti OFX 180 Instructions Manual

COUNTRY COUNTRY TO BE SELECTED
Argentina AMERICA LATINA
Australia NZL/AUSTRALIA
Austria ÖSTERREICH
Belgium BELGIUM
Brazil BRASIL
Chile AMERICA LATINA
China CHINA
Colombia AMERICA LATINA
Denmark DANMARK
Finland FINLAND
France FRANCE
Germany DEUTSCHLAND
Greece INTERNATIONAL
Holland HOLLAND
Hong Kong SINGAPORE
India INDIA
Israel ISRAEL
Italy ITALIA
Luxembourg BELGIUM
Mexico AMERICA LATINA
New Zealand NZL/AUSTRALIA
Norway NORGE
Peru AMERICA LATINA
Portugal PORTUGAL
Rest of world INTERNATIONAL
Singapore SINGAPORE
South Africa S. AFRICA
Spain ESPAÑA
Sweden SVERIGE
Switzerland SCHWEIZ
Taiwan TAIWAN
UK U.K.
Uruguay AMERICA LATINA
Venezuela AMERICA LATINA
To confirm the setting.
To complete the procedure.
H
OW TO START AT ONCE
T
O SET THE DATE AND TIME
The first time that you connect the fax machine to the
power supply and every time there is a voltage drop,
you need to set the date and time as described below.
Once they have been set, they can be modified, see "To
change the date and time", section "Installation".
The display shows:
The display shows:
/ If you want to select a different format from the one dis-
played, press the |/} keys.
The display shows:
/ If you want to select the other time format (12-hour), press
the |/} keys.
The display shows:
/ Enter the new date and time (e.g. 26-07-03; 12:00). As
each digit is entered, the cursor will move to the next one.
/ If you only want to change a few digits, move the cursor to
them using the |/} keys and overwrite them with the correct
digits.
To confirm the setting. The procedure for setting the date and
time is complete. The new date and time will be updated
automatically and will be printed on each page sent.
To return the fax machine to the initial stand-by mode.
If you have chosen the 12-hour time format, the display will
show the letter "p" (post meridiem) or the letter "a" (ante
meridiem). To switch from one letter to another, move the cur-
sor to the letter to be changed, using the |/} keys, and press
the key.
If a mistake has been made or you wish to interrupt the proce-
dure, press the key.
Remember that the stand-by mode is the status in which it is idle
and that it is the mode from which the machine can be pro-
grammed.
VII