Mazda 3 Owner's Manual page 519

Mazda3_8CV6-EA-12H_Edition2 Page519
Wednesday, October 17 2012 3:16 PM
3. Disconnect the bulb by pulling it out.
4. Install the new bulb in the reverse order
of the removal procedure.
qReplacing Interior Light Bulbs
Overhead light (Front)/Map lights,
Overhead light (Rear), Vanity mirror
í
lights
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver.
2. Disconnect the bulb by pulling it out.
Overhead light (Front)/Map lights
Form No.8CV6-EA-12H
Black plate (519,1)
Owner Maintenance
Overhead light (Rear)
Edge
í
Vanity mirror lights
3. Install the new bulb in the reverse order
of the removal procedure.
Trunk light (4 Door)
1. Press both sides of the lens cap to
remove it.
í
Some models.
Maintenance and Care
8-57