Mazda 3 Owner's Manual page 141

Mazda3_8CV6-EA-12H_Edition2 Page141
Wednesday, October 17 2012 3:11 PM
3. Make sure all the windows, the
í
moonroof , the hood and the trunk lid
are closed. Close and lock all doors and
the liftgate from the outside using the
key. If you have the keyless entry
system, press the lock button on the
transmitter.
The hazard warning lights will flash
once.
The following method will also arm the
theft-deterrent system:
(With advanced key)
Press a request switch on the doors or
the lock button on the transmitter.
(Without advanced key)
Close the hood and the liftgate/trunk
lid. Press the area on the door-lock
switch marked
doors.
The security indicator light in the
instrument panel flashes twice per
second for 20 seconds.
The theft deterrent system can also be
armed by activating the auto re-lock
function with all the doors, the liftgate/
trunk lid and the hood closed.
NOTE
Locking the doors with the inside door-lock
knob will not arm the system.
4. After 20 seconds, the system is fully
armed.
Form No.8CV6-EA-12H
once. Close all
Black plate (141,1)
Security System
NOTE
Auto re-lock function
l
After unlocking with the transmitter or the
request switch, all doors and the liftgate
will automatically lock if any of the
following operations are not performed
within about 30 seconds.
A door or the liftgate/trunk lid is opened.
l
The auxiliary key is inserted into the key
l
slot (with advanced key).
The key is inserted in the ignition switch.
l
The push button start is in any position
l
except off (with advanced key).
The ignition is switched ON.
l
The system will disarm if one of the
l
following operations takes place within 20
seconds after closing the trunk lid/hood and
locking all the doors and the liftgate:
Pressing the unlock button on the
l
transmitter.
Any door or the liftgate/trunk lid is
l
opened.
Unlocking a door with the inside door-
l
lock knob.
Unlocking a door with the door lock
l
switch.
Unlocking the driver's door with the key.
l
The hood is opened.
l
The key is inserted in the ignition switch.
l
The auxiliary key is inserted into the key
l
slot (With advanced key).
The push button start is pressed or a
l
door is unlocked using a request switch
on the front doors (With advanced key).
The ignition is switched ON.
l
To rearm the system, do the arming
procedure again.
When the doors are locked by pressing the
l
lock button on the transmitter or request
switch on the front doors or using the key
while the theft-deterrent system is armed,
the hazard warning lights will flash once to
indicate that the system is armed.
í
Some models.
Knowing Your Mazda
3-63