Mazda 3 Owner's Manual page 287

Mazda3_8CV6-EA-12H_Edition2 Page287
Wednesday, October 17 2012 3:13 PM
6. If it does not match with the previously
registered code, SR1 Err is displayed
and then it returns to SR1 - - - - .
7. If it matches with the previously
registered code, ENTER PIN appears
again and it switches to code input
mode.
8. SR1 - - - - appears, and it is ready for
input of the new ID code.
(New ID code input)
9. Input the new ID code using channel
preset buttons 1-4.
Example: If 1234 is input as the new
code, SR1 1234 is displayed.
(New ID code input determination)
10. Determine the new ID code which
has been input by pressing the auto
memory button or scan button
( ).
11. PIN CHANGED appears for three
seconds which indicates that the new
ID code input has been completed.
12. It returns to the former display.
NOTE
If an ID code is not input for ten seconds,
l
Err is displayed and it returns to the
former display.
Channel preset buttons 1, 2, 3, 4 and the
l
auto memory button or scan button (
are used for input of the ID code. Buttons 5
and 6 cannot be used.
Individual channel locking
If a channel is locked, the channel is
muted.
Form No.8CV6-EA-12H
NOTE
If the registered ID code is forgotten, return
l
the ID code to the default [0000]. (See
INTIALIZATION OF ID CODE section)
The scan button refers to the operation for
l
an In-dash CD changer-equipped vehicle,
and the auto memory button refers to the
operation for a CD player-equipped
vehicle.
(Locking a channel)
1. Select a channel to be locked by
turning the manual tuning dial.
Example: Select channel 100
(Registered ID code input preparation)
2. Press and hold the auto memory button
or scan button (
channel preset button 6. Hold both
buttons together for 1.5 seconds.
3. ENTER PIN appears for three
seconds which indicates that it is in
code input mode.
4. SR1 - - - - appears which indicates
that it is ready for code input.
(Registered ID code input)
5. Input the registered ID code using
channel preset buttons 1-4. Example: If
the registered ID code is 2323 , input
2323 . At this time SR1 2323 is
displayed.
)
(Registered ID code input
determination)
6. Determine the code which has been
input by pressing the auto memory
button or scan button (
7. If it does not match the registered code,
SR1 Err is displayed and then it
returns to SR1 - - - - .
Black plate (287,1)
Interior Comfort
Audio System
), then press
).
6-47