Mazda 3 Owner's Manual page 351

Mazda3_8CV6-EA-12H_Edition2 Page351
Wednesday, October 17 2012 3:14 PM
6. When the programming is completed,
and PAIR SUCCESS are
displayed after about 10-30 seconds,
after which PAIR SUCCESS
continues to be displayed for three
seconds, and then the unit returns to the
normal display.
NOTE
If pairing cannot be completed, try 1234
l
instead. Refer to the owner's manual of
your mobile device for the right PIN code.
®
Some Bluetooth audio devices need a
l
certain amount of time before the
symbol is displayed.
If the programming failed, Err flashes
l
for three seconds.
Programming cannot be performed while
l
the vehicle is moving. If you attempt to
perform programming while the vehicle is
moving, PAIR DISABLE is displayed.
®
If seven Bluetooth
l
already been programmed to the vehicle,
programming cannot be performed and
MEMORY FULL is displayed. Delete
one programmed device to program
another one.
Changing the link to a Bluetooth
audio device
If several devices have been programmed,
®
the Bluetooth unit links the device last
programmed. If you would like to link a
different programmed device, it is
necessary to change the link. The order of
device priority after the link has been
changed is maintained even when the
ignition is switched off.
1. Using the audio control dial, select the
link change mode LINK CHANGE
in the BT SETUP mode. (Refer to
®
Bluetooth audio device set-up for
details.)
Form No.8CV6-EA-12H
audio devices have
®
Black plate (351,1)
Bluetooth® Audio (Type A)
2. Press the audio control dial to
determine the mode.
3. The name of the currently linked
®
Bluetooth audio device is displayed.
®
If no Bluetooth audio device is
currently linked, the name of the first
device among the programmed devices
is displayed.
4. Turn the audio control dial to select the
name of the device you would like to
link.
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
5. Press the audio control dial to select the
device you would like to link.
The symbol disappears, and
PAIRING flashes in the display.
NOTE
When GO BACK is selected and the audio
control dial is pressed, the display returns to
LINK CHANGE .
Interior Comfort
6-111