Mazda 3 Owner's Manual page 131

Mazda3_8CV6-EA-12H_Edition2 Page131
Wednesday, October 17 2012 3:11 PM
To close to the desired position, press the
front of the slide switch or pull the tilt
switch.
Open
Close
qPower Moonroof Re-set Procedure
If the battery is disconnected, the
moonroof will not operate. The moonroof
will not operate correctly until it is re-set.
Carry out the following procedure to re-
set the moonroof and resume operation:
1. Switch the ignition ON.
2. Press the tilt switch while the rear of
the moonroof tilts open to the fully
open position. The moonroof then
closes a little.
NOTE
If the re-set procedure is performed while the
moonroof is in the slide position (partially
open) it closes before the rear tilts opens.
Form No.8CV6-EA-12H
qSunshade
The sunshade can be opened and closed
by hand.
The sunshade opens automatically when
the moonroof is opened, but must be
closed by hand.
Tilt down
(Close)
Black plate (131,1)
Knowing Your Mazda
Doors and Locks
CAUTION
Ø The sunshade does not tilt. To
avoid damaging the sunshade, do
not push up on it.
Ø Do not close the sunshade while
the moonroof is opening. Trying to
force the sunshade closed could
damage it.
Sunshade
3-53