Mazda 3 Owner's Manual page 349

Mazda3_8CV6-EA-12H_Edition2 Page349
Wednesday, October 17 2012 3:14 PM
Display
Pairing
PAIR DEVICE
program mode
Link change
LINK CHANGE
mode
Pairing
PAIR DELETE
deletion mode
Device
DEVICE INFO information
display mode
3. Press the audio control dial to
determine the mode.
®
Bluetooth audio device programming
®
Any Bluetooth audio device must be
programmed to the vehicle's Bluetooth
unit before it can be listened to over the
vehicle's speakers.
A maximum of seven devices including
®
Bluetooth audio devices and hands-free
mobile phones can be programmed to one
vehicle.
Form No.8CV6-EA-12H
Mode Function
®
Bluetooth audio
device programming
Changing link
®
to Bluetooth
audio device
Deleting link
®
to Bluetooth
audio device
Displaying
vehicle's
®
Bluetooth
unit
information
®
Black plate (349,1)
Bluetooth® Audio (Type A)
NOTE
Always perform Bluetooth
l
programming while the vehicle is stopped.
®
If a Bluetooth device has already been
l
programmed to the vehicle as a hands-free
mobile phone, it does not need to be
programmed again when using the device
®
as a Bluetooth audio device. Conversely, it
does not need to be programmed again as a
hands-free mobile phone if it has already
been programmed as a Bluetooth
device.
Look around to be sure other likely
l
®
Bluetooth audio devices are not in range
when you start to program. If in doubt,
move your car to another location. The
transmission range of a Bluetooth
device is about 10 m (32 ft). Therefore, if
there is another Bluetooth
within a 10 m (32 ft) radius of the vehicle,
the device may be identified and
programmed instead.
Device registration can also be done using
l
voice recognition (page 6-120).
Concerning the operation of a Bluetooth
audio device itself, refer to its instruction
manual.
®
Some Bluetooth audio devices have PIN
codes (four digits). Refer to the audio
device's instruction manual because the
programming procedure differs depending
on whether it has a PIN code or not.
Programming a Bluetooth
device which has a four-digit PIN code
1. Using the audio control dial, select the
pairing program mode
PAIR DEVICE in the BT SETUP
mode. (Refer to Bluetooth
device set-up for details.)
Interior Comfort
®
audio device
®
audio
®
audio
®
audio device
®
®
audio
®
audio
6-109