Mazda 3 Owner's Manual page 285

Mazda3_8CV6-EA-12H_Edition2 Page285
Wednesday, October 17 2012 3:13 PM
Instant replay
This function allows you to rewind and
replay the program that you were
previously or are currently listening to.
Press the instant replay button (
When the seek tuning button (
pressed (about 1.5 seconds), playback
starts from the beginning of the current
program.
When the seek tuning button (
pressed twice, playback starts from the
beginning of the previous program.
When the seek tuning button (
pressed for about 1.5 seconds or longer,
the program is reversed while the button
is being pressed.
When the seek tuning button (
pressed (about 1.5 seconds), playback
starts from the beginning of the next
program. When the seek tuning button
( ) is pressed (about 1.5 seconds) while
the last program is being played, the
instant replay mode is cancelled.
When the seek tuning button (
pressed for 1.5 seconds or longer, the
program is fast-forwarded while the
button is being pressed. When pressing
and holding the button until the end of the
program, the instant replay mode is
cancelled.
When the instant replay button (
pressed again, playback is paused, or
playback starts if it has been paused.
Instant replay (PAUSE)
If the instant replay button (
pressed while the instant replay mode is
off, instant replay mode is turned on in a
paused condition (PAUSE). Press the
instant replay button (
resume playback from the point at which
it was paused.
Form No.8CV6-EA-12H
NOTE
l
l
).
) is
Initialization of ID code
If the registered ID code is forgotten,
) is
return the ID code to the default [0000] by
performing the following steps:
Setting condition: SAT mode
) is
NOTE
The scan button refers to the operation for an
In-dash CD changer-equipped vehicle, and the
) is
auto memory button refers to the operation for
a CD player-equipped vehicle.
(Master code input preparation)
1. Press and hold the auto memory button
) is
2. ENTER PIN appears for three
3. SR1 - - - - appears, which indicates
) is
(Master code input)
4. Input the master code using the channel
) is
(Master code input determination)
) again to
5. Determine the master code which has
Black plate (285,1)
Audio System
If the channel is changed, the instant replay
buffer data is deleted.
After turning on the power and switching to
SIRIUS digital satellite radio mode, the
instant replay mode is not available for
several seconds after changing channels.
or scan button ( ), then press
channel preset button 4. Hold both
buttons together for 1.5 seconds.
seconds which indicates that it is in
code input mode.
that it is ready for code input.
preset buttons 1-4.
(The master code is already set at the
time of factory shipment.)
been input by pressing the auto
memory button or scan button (
Interior Comfort
).
6-45