Mazda 3 Owner's Manual page 307

Mazda3_8CV6-EA-12H_Edition2 Page307
Wednesday, October 17 2012 3:13 PM
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
NOTE
When an
received, a receivable multicast channel is also
received.
Seek tuning
Pressing the seek tuning button (
will cause the tuner to seek a higher or
lower frequency automatically.
NOTE
If you continue to press and hold the seek
l
tuning button ( ,
continue changing without stopping.
When an
l
received, a receivable multicast channel is
also received.
Scan tuning
You can search for receivable radio
stations by touching the
button.
Scanning stops at each station for about
five seconds.
Touch the on-screen button one time
during reception to continue receiving a
broadcasting station.
Preset channel tuning
The six preset channels can be used to
store six AM and twelve FM stations.
1. To set a channel, first select AM, FM1,
or FM2. Tune to the desired station.
2. Press and hold any of the preset on-
screen buttons. The reception
frequency is programmed and
displayed on the preset button.
Form No.8CV6-EA-12H
broadcast is being
, )
) the frequency will
broadcast is being
on-screen
Black plate (307,1)
Audio System
3. Repeat this operation for the other
stations and bands you want to store.
When receiving a programmed
frequency, select AM, FM1, or FM2
and touch the preset on-screen button.
NOTE
The programmed frequency is displayed on the
preset button.
Auto memory tuning
This is especially useful when driving in
an area where the local stations are
unknown. Additional AM/FM stations
can be stored without disturbing the
previously set channels.
1. Touch the on-screen button. The
auto memory preset list is displayed
and the previously tuned frequency is
received.
2. Touch the on-screen button to
display the frequencies of up to ten
radio stations on the auto memory
preset list.
3. Touch the desired frequency.
NOTE
Touch the on-screen button during
auto memory tuning to return to the AM/FM
main screen.
Radio Broadcast Data System (RBDS)
Radio text information display
A maximum of 64 characters of radio text
information sent from a broadcasting
station is displayed in the audio display.
Interior Comfort
6-67