Mazda 3 Owner's Manual page 417

Mazda3_8CV6-EA-12H_Edition2 Page417
Wednesday, October 17 2012 3:15 PM
í
qClock
When the ignition is switched to ACC or
ON, the time is displayed.
Time setting
1. Switch the ignition to ACC or ON.
2. Adjust the time using the time setting
buttons ( , ).
The hours advance while the time
setting button ( ) is pressed.
The minutes advance while the time
setting button ( ) is pressed.
Time resetting
1. Switch the ignition to ACC or ON.
2. Press the :00 button.
3. When the button is pressed, the time
will be reset as follows:
(Example)
12:01 12:29→12:00
12:30 12:59→1:00
NOTE
When the button is pressed, the seconds will
start at 00 .
Form No.8CV6-EA-12H
Black plate (417,1)
Interior Equipment
qOutside Temperature Display
(Fully Automatic Type)
When the ignition is switched ON, the
ambient temperature is displayed.
NOTE
Under the following conditions, the ambient
temperature display may differ from the actual
ambient temperature depending on the
surroundings and vehicle conditions:
Significantly cold or hot temperatures.
l
Sudden changes in ambient temperature.
l
The vehicle is parked.
l
The vehicle is driven at low speeds.
l
qClimate Control Display
The climate control system status is
displayed. To operate the climate control
system, refer to Climate Control System
(page 6-2).
qAudio Display
The audio system status is displayed. To
operate the audio system, refer to
Audio System (page 6-16).
í
Some models.
Interior Comfort
6-177