Mazda 3 Owner's Manual page 353

Mazda3_8CV6-EA-12H_Edition2 Page353
Wednesday, October 17 2012 3:14 PM
5. If a selection other than GO BACK
is made and the audio control dial is
pressed, SURE ? NO is displayed.
6. Rotate the audio control dial clockwise
and switch the display to SURE ?
YES .
NOTE
The display changes as follows depending on
whether the audio control dial is rotated
clockwise or counterclockwise.
-Clockwise: SURE ? YES displayed
-Counterclockwise: SURE ? NO displayed
7. Press the audio control dial to delete
the selected device.
NOTE
Select GO BACK and press the audio
control dial to return to the PAIR DELETE
display.
8. PAIR DELETED is displayed for
three seconds after the deletion is
completed, and then it returns to the
normal display.
NOTE
If an error occurs while trying to delete the
programmed device, Err flashes in the
display for three seconds and the display
returns to LINK DELETE .
®
Bluetooth audio device information
display
1. Using the audio control dial, select the
pair device information display mode
DEVICE INFO in the BT SETUP
mode. (Refer to Bluetooth
device set-up for details.)
2. Press the audio control dial to
determine the mode.
3. The name of the Bluetooth
device is displayed.
Form No.8CV6-EA-12H
Bluetooth® Audio (Type A)
4. Rotate the audio control dial to select
the information for the Bluetooth
which you would like to view.
NOTE
When GO BACK is selected and the audio
control dial is pressed, the display returns to
DEVICE INFO .
qHow to Use the Bluetooth®
Audio System
Switching to Bluetooth
To listen to music or voice audio recorded
to a Bluetooth
the Bluetooth
audio device using the audio system
control panel.
Any Bluetooth
programmed to the vehicle's Bluetooth
unit before it can be used. (Refer to
Bluetooth
1. Switch the ignition to ACC or ON.
2. Turn on the Bluetooth
power.
®
audio
Make sure that the
displayed in the information display.
The symbol is not displayed if an
unprogrammed Bluetooth
device is being used or the vehicle's
®
unit
Bluetooth
Black plate (353,1)
Interior Comfort
Device name
BT address
®
audio mode
®
audio device, switch to
®
audio mode to operate the
®
audio device must be
®
audio device programming )
®
audio device's
symbol is
®
audio
®
unit has a malfunction.
®
unit
®
6-113