Mazda 3 Owner's Manual page 496

Mazda3_8CV6-EA-12H_Edition2 Page496
Wednesday, October 17 2012 3:15 PM
Maintenance and Care
Owner Maintenance
3. Pull down the blade rubber and slide it
out of the blade holder.
4. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.
CAUTION
Don't bend or discard the stiffeners.
You need to use them again.
8-34
Form No.8CV6-EA-12H
Black plate (496,1)
5. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse order of removal.