Mazda 3 Owner's Manual page 461

Mazda3_8CV6-EA-12H_Edition2 Page461
Wednesday, October 17 2012 3:15 PM
Type B
1. Remove the tiedown eyelet from the
trunk (page 7-3).
2. Remove the cover.
NOTE
Remove the cover completely and store it so as
not to lose it.
3. Securely install the tiedown eyelet
using the lug wrench.
Lug wrench
Form No.8CV6-EA-12H
Black plate (461,1)
In Case of an Emergency
Emergency Towing
4. Hook the tying rope to the tiedown
eyelet.
CAUTION
Ø If the tiedown eyelet is not securely
tightened, it may loosen or
disengage from the bumper when
tying down the vehicle. Make sure
that the tiedown eyelet is securely
tightened to the bumper.
Ø The front tiedown hook is
designed only for lashing the
vehicle during overseas transport.
Do not use the front tiedown hook
for any other use such as
transporting the vehicle on trucks
or railway.
7-27