Rebooting The Rangemax Next - NETGEAR WN802T - RangeMax Next Wireless Access Point User Manual

– A list of the factory default settings can be found in
and Technical
Warning: Do not try to go online, turn off the Access Point, shut down the

Rebooting the RangeMax NEXT

You can reboot the wireless access point from the browser interface or by using the reset button on
the rear panel.
To reboot the wireless access point from the user interface:
1. From the main menu of the browser interface, click Reboot AP under the Management menu
on the left navigation pane. The Reboot AP screen will display..
Figure 4-5
2. Select the Yes radio button, and then click Apply.
Viewing the Available Wireless Station List
The Available Wireless Station List contains a table of all IP devices associated with this wireless
access point network defined by its Wireless Network Name (SSID).
To view the list of available wireless stations:
1. From the main menu of the browser interface, select Available Wireless Station List under
the Information menu of the left navigation pane. The Available Wireless Station List will
display.
Management
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual
Specifications".
computer or do anything else to the Access Point until it finishes
restarting. When the Test light turns off, wait a few more seconds
before doing anything with the Access Point.
v1.0, August 2007
Appendix A, "Default Settings
4-5