NETGEAR WN802T - RangeMax Next Wireless Access Point User Manual page 35

• Data Encryption. The available options depend on the Network Authentication setting
selected (see Table 3-1
are explained in the table below:
Table 3-1. Data Encryption Settings
Data Encryption Type
None
64 bits WEP
128 bits WEP
TKIP
AES
• WEP Authentication Type. WEP can be authenticated using Open System or Automatic. If
set to Open System, clients can only associate to the wireless access point by using the Open
System option. If set to Automatic, clients can associate to the wireless access point using both
Open System and Shared Key. Setting the Authentication Type to Automatic will detect which
WEP authentication method is being used. The default is Automatic.
• Use of Passphrases and Keys are explained below:
– Passphrase. To use the Passphrase to generate the WEP keys, enter a passphrase and click
the Generate Keys button. You can also enter the keys directly. These keys must match the
other wireless stations.
– Key 1, Key 2, Key 3, Key 4. If using WEP, select the key to be used as the default key.
Data transmissions are always encrypted using the default key. The other keys can only be
used to decrypt received data.
– WPA Preshared Key Passphrase. If using WPA-PSK, WPA2-PSK or WPA-PSK +
WPA2-PSK, enter the passphrase here. All wireless stations must use the same passphrase
(network key). The network key must be from 8 to 63 characters in length.
Wireless Security Settings
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual
above); otherwise, the default is None. The Data Encryption settings
Description
No encryption is used.
Standard WEP encryption, using 40/64 bit encryption.
Standard WEP encryption, using 104/128 bit encryption.
Automatic encryption with WPA-PSK; requires passphrase
Automatic encryption with WPA2-PSK; requires passphrase
v1.0, August 2007
3-3