Configuring And Testing Your Pcs For Wireless Connectivity - NETGEAR WN802T - RangeMax Next Wireless Access Point User Manual

Step 1
Figure 2-5

Configuring and Testing Your PCs for Wireless Connectivity

Program the wireless adapter of your PCs to have the same SSID and channel that you configured
in Wireless Settings for the WN802T. Check that they have a wireless link and are able to obtain
an IP address by DHCP from the WN802T.
Note: If you are configuring the WN802T from a wireless computer and you change the
SSID, channel, or Security Profile settings, you will lose your wireless connection
when you click Apply. You must then change the wireless settings of your
computer to match the new settings.
Once your PCs have basic wireless connectivity to the WN802T, you can deploy the WN802T and
configure the advanced wireless security functions.
Installation and Configuration
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual
Step 2
v1.0, August 2007
Step 3
2-11