Management; Changing The Password - NETGEAR WN802T - RangeMax Next Wireless Access Point User Manual

This chapter describes how to use the management and information features as well as the
advanced wireless settings features of your RangeMax NEXT Wireless-N Access Point. These
features can be found under the Management, Information and Advanced menus on the left
navigation pane of the browser interface.

Changing the Password

Note: Before changing the WN802T password, use the backup utility to save your
configuration settings. If you forget your new password, you must reset the
WN802T back to the factory defaults and use the default password. Consequently,
you will have to restore any WN802T configuration settings you have made. The
backup file can be used in this event.
The default password for the WN802T is password. NETGEAR recommends that you change this
password to a more secure password.
To change the password:
1. Select Change Password under the Management menu on the left navigation pane. The
Change Password screen will display.
Figure 4-1
Figure 4-2
v1.0, August 2007
Chapter 4

Management

4-1