NETGEAR WN802T - RangeMax Next Wireless Access Point User Manual page 43

5. The Trusted Wireless Stations table will display any wireless stations you have entered. If
you have not entered any wireless stations this list will be empty.
Note: If Turn Access Control On is enabled and the Access Control List is blank,
then no wireless PCs will be able to connect to your wireless network
To delete an existing entry:
Check the radio button adjacent to the entry and then click Delete.
To set up the trusted wireless stations control list:
1. Click Add on the Access Control List screen. The Wireless Card Access Setup screen will
display. The Available Wireless Cards table will display all available wireless PCs and their
MAC addresses.
Figure 3-9
2. If the wireless PC you want to add appears in the list, check its adjacent radio button and click
Add.
• If the PC is not displayed, make sure that it is configured correctly and click Refresh.
• If no wireless PCs appear in the Available Wireless Cards access list, then you can
manually enter the Device Name and MAC Address of the wireless PC in the appropriate
fields and then click Add. (You can usually find the MAC address printed on the bottom
of the wireless adapter.)
Wireless Security Settings
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual
v1.0, August 2007
3-11