NETGEAR WN802T - RangeMax Next Wireless Access Point User Manual page 16

RangeMax NEXT Wireless-N Access Point WN802T Reference Manual
Figure 1-1
You can use the status lights on the front of the wireless access point to verify various conditions
described in the following table
.
Table 1-1. Status Light Descriptions
Label Activity
Power On -- Green Solid
Off
Solid Amber
Blinking Amber
Ethernet On -- Amber
On -- Green
Blink – Amber or Green
Off
WLAN On – Slow blink
On – Fast blink
Off
1-4
Description
Power is supplied the and the WN802T has passed its diagnostic test.
Power is not supplied to the router.
System is being initialized.
Firmware upgrade is in progress.
The Ethernet port has detected a connection at either 10 Mbps or
100 Mbps.
The Ethernet port has detected a connection at 1000 Mbps.
Data is being transmitted.
No ethernet link.
The Wireless port is initializing and the wireless feature is enabled.
Indicates that a WLAN signal is being sent
Wireless radio is turned off.
v1.0, August 2007
Introduction