NETGEAR WN802T - RangeMax Next Wireless Access Point User Manual page 61

To configure the WN802T in wireless repeater mode:
1. Open a web browser and log into the WN802T using the addressing scheme you have set up.
Figure 5-3
2. Under Advanced on the main menu, click Wireless Bridging. The Wireless Bridging screen
will display showing the default settings for the wireless access point.
3. Select the Repeater with Wireless Client Association radio button to enable Repeater Mode.
4. Enter the MAC address of the remote wireless access point and click Add. The AP's MAC
address and connection information will appear in the Wireless Remote Access Point List.
5. Click Apply to save your changes.
Advanced Wireless Bridging
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual
v1.0, August 2007
5-5