NETGEAR WN802T - RangeMax Next Wireless Access Point User Manual page 58

RangeMax NEXT Wireless-N Access Point WN802T Reference Manual
.
Figure 5-1
2. Under Advanced on the main menu, click Wireless Bridging. The Advanced Wireless
Bridging screen will display showing the default settings for the wireless access point.
3. Select the Wireless Multi-Point Bridging radio button to enable multi-point bridging.
4. Enter the MAC address of the first wireless access point and click Add. The AP's MAC
address and connection information will appear in the Wireless Accept Point List.
You can add wireless access points to the list for a total of six. (These wireless access points
must be configured for Multi-Point Bridging.)
5. Check the Enable Wireless Client Association radio box to allow wireless clients access to
this wireless access point.
6. Click Apply to save your changes.
To delete a remote AP from the list, click Delete adjacent to the AP's MAC address in the Wireless
Remote Access Point List.
5-2
v1.0, August 2007
Advanced Wireless Bridging