AT&T MERLIN LEGEND Release 2.0 System Programming And Maintenance Manual page 78

System Programming and Maintenance (SPM)
To initialize SPM, follow
Step
Display
1
Start the SPM program by typing spm at the C:> prompt if your PC has a hare
disk, otherwise at the A:> prompt.
2
Welcome to SPM
The MERLIN LEGEND
System Programming
& Maintenance Utility
please press any key
to continue:
Version 2.xx
3
COMM PORT:
1. Comm 1
2. Comm 2
Enter selection #
4
Speed:
1.
1200
2. 2400
Enter selection #
5
COLOR
Enter selection (y/n):
these steps:
Instructions
Press any key.
The screens in Steps 3 through 7 appear
only if the system has not been initialized.
Select the communications port used by
SPM by typing 1 for COM1 or 2 for COM2.
Select the communication speed by typing
1 for 1200 bps 2 for 2400 bps.
If you have a color monitor, type y.
Otherwise, type n.
Installing the SPM Software
53