AT&T MERLIN LEGEND Release 2.0 System Programming And Maintenance Manual page 50

System Programming and Maintenance (SPM)
Step Display
4
Press ESC to abort
Enter filename:
(default is backup.ams)
5
Press ESC to Abort.
Est. Blocks: xxx-xxxx
filename
BACKUP IN PROGRESS
Received Block
6
Backup aborted.
Please press Enter
to see the main menu:
Instructions
Enter the filename you have chosen, or
press to select the default name.
You can specify a drive letter with the
filename (A: or B:) but no path
information.
SPM indicates the status of the backup by
displaying the number of the last block
received. If you are backing up from
Release 1.1 or 2.0 of the communications
system, Line 2 of the display screen shows
the estimated number of blocks to be sent
from the control unit. This line is blank if
you are backing up from Release 1.0.
If you abort the backup, the partial backup
file is deleted to prevent restoration from a
corrupted file. You see the screen shown
in Step 6. Otherwise, when Backup is
complete, you see the screen shown in
Step 7.
Press to return to the SPM Main
Menu.
2 5
Backup