AT&T MERLIN LEGEND Release 2.0 System Programming And Maintenance Manual page 45

System Programming and Maintenance (SPM)
To access SPM with a local or a remote modem connection, follow these
steps:
Step Display
1
Start the SPM program by typing spm. If you prefer to program in a language
other than the current language setting for SPM, use the -l option to the spm
command (note that the option is a lowercase letter L, not the number 1):
spm -l english
spm -l french
spm -l spanish
The SPM welcome screen appears as shown in Step 2.
2
Welcome to SPM
The MERLIN LEGEND
System Programming
& Maintenance Utility
Please press any key
to continue:
Version 2.xx
3 Make a data connection to the control unit's internal modem. The
following modem commands are for Hayes® and Hayes-compatible
modems. They may not be the commands used by your modem. Refer
to your modem user's guide for specific information.
If the PC is in the same location as the control unit, type
If the PC is in a remote location and your system has activated the
Remote Access feature, type ATDT followed by the remote access
telephone number, followed by W
need to press it more than once to get the Password prompt.)
If the PC is in a remote location and your system has not activated the
Remote Access feature, place a voice call to the system, using the
main telephone number, and have the operator transfer the call to the
modem. (The operator dials
To put the modem on line, type ATH1 and press
20
Starting SPM
Instructions
Press any key. (You may have to press it
several times.) This brings up a blank
screen on which you can enter modem
commands.
10, and press
10 to transfer the call to the modem.)
10.
. (You may
.