AT&T MERLIN LEGEND Release 2.0 System Programming And Maintenance Manual page 76

System Programming and Maintenance (SPM)
Press the UPDATE function key, [F4] .
5.
Insert the SPM diskette into the floppy disk drive and press
6.
A request for confirmation appears.
7. Press
You are prompted to insert the SPM diskette.
Press
8.
The system shows the progress of the installation by displaying dots at
the rate of one dot per second. The procedure takes about
3½ minutes.
When the installation is finished, a confirmation message appears.
Press
9.
You are prompted to remove the SPM diskette and to shut down the
system.
10. Remove the diskette and press
(If you press [Esc] instead, you can continue running SPM; however,
the software is not installed until you shut down and reboot.)
When shutdown is finished, you are prompted to reboot the system.
11. Press the PC's reset button or [Alt] - [Ctl] - [Delete] to reboot.
The installation procedure is complete. Since the UNIX system version of
SPM does not have to be initialized, you are ready to use SPM.
to continue.
to continue.
to continue.
to shut down the system.
Installing the SPM Software
.
51