AT&T MERLIN LEGEND Release 2.0 System Programming And Maintenance Manual page 49

System Programming and Maintenance (SPM)
Step
1
SPM Main Menu
Menu: Select Function
Sys Program Maintenance
Backup
Boards
Print Opts
Monitor
2
Make a selection for
the BACKUP file.
NEW FILE will create
a new file
on selected device.
Press Esc to Abort.
GOTO FLOPPY
MAKE NEW FILE
BACKUP.AMS
3
Make a selection for
the BACKUP file.
NEW FILE will create
a new file
on selected device.
Press Esc to Abort.
GOTO FLOPPY
MAKE NEW FILE
BACKUP.AMS
24
Backup
Display
Restore
Pass-Thru
Password
Language
GOTO HARD DISK
MAKE NEW FILE
BACKUP.AMS
Instructions
Select Backup by pressing [F2] . The
following two screens appear.
The first screen (Make a selection
for) is an information screen. Entries you
make appear only on the second screen.
If you are using a hard disk PC, go to
Step 3.
If you are using a floppy disk PC, remove
the SPM diskette and insert a formatted
diskette. Highlight GOTO FLOPPY (use the
arrow keys) and press
You see only one of the two narrow
screens. If you are working on a floppy
disk PC, you see the GOTO HARD DISK
screen. If you are working on a hard disk
PC, you see the GOTO FLOPPY screen.
The filename shown on the GOTO screen
(BACKUP.AMS) is the default name for a
backup file.
To select the default filename, highlight
BACKUP.AMS (use the arrow keys) and
press . Goto Step 5.
To specify a different name for this file,
select MAKE NEW FILE and press
Go to Step 4.
.