Starting Spm; With A Direct Local Connection - AT&T MERLIN LEGEND Release 2.0 System Programming And Maintenance Manual

System Programming and Maintenance (SPM)

Starting SPM

The procedure for accessing SPM differs slightly, depending on whether your
PC is connected directly or by modem to the control unit. Both procedures
are described in the following sections.

With a Direct Local Connection

To access SPM when your PC is connected directly to the control unit, follow
these steps:
S t e p D i s p l a y
1 If you do not have a hard disk, insert the SPM diskette into Drive A and switch to
Drive A, if it is not already the current drive.
2 Start the SPM program by typing spm. The SPM Welcome screen appears as
shown in Step 3.
3
Welcome to SPM
The MERLIN LEGEND
System Programming
& Maintenance Utility
Please press any key
to continue:
Version 2.xx
4
SPM Main Menu
Menu: Select Function
Sys Program
Backup
Boards
Print Opts
Monitor
18
Starting SPM
I n s t r u c t i o n s
Press any key. The SPM Main Menu
appears as shown in Step 4.
If the Main Menu does not appear or if the
information on the screen is garbled, press
any key again.
Select an option by pressing one of the
function keys.
Maintenance
Restore
Pass-Thru
Password
Language