AT&T MERLIN LEGEND Release 2.0 System Programming And Maintenance Manual page 52

System Programming and Maintenance (SPW)
The following boards can be selected:
Board
Type
Description
4 loop-start line jacks with 4 touchtone receivers
400LSR
4 ground-start/loop-start line jacks with 4 touchtone
400GLR
receivers
800LS 8
8
800GLS
4
408LSA
4
408GLR
8
O08ATL
O08MLX 8
12 tip/ring station jacks with 2 touchtone receivers or
012TR/OPT
008 OPT jacks
8 DID trunk jacks with 2 touchtone receivers
800DID
4 E&M tie trunk jacks
400E&M
1 DS1 jack (24 channels)
100D
408GLM 4 ground-start/loop-start line jacks and 8 MLX station
jacks (16 endpoints)
The Inspect function ( [PgDn] ) lets you see which modules have been
assigned to slots on the control unit. Note that phantom boards as well as
real boards are displayed with the Inspect function; to see phantom board
assignments, you must print the System Information report (System
More
Print
You cannot use this option to change a board type. All boards assigned with
the Boards option, including phantom boards, are cleared (unassigned), if
you perform a Board Renumber (System
loop-start line jacks
ground-start/loop-start line jacks
loop-start line jacks and 8 ATL station jacks
ground-start/loop-start line jacks and 8 ATL station jacks
ATL station jacks
MLX station jacks (16 endpoints)
SysSet-up).
Board Renum).
2 7
Boards