Approved Sff/Sfp Gbic Transceivers; Safety Information; Laser Classification; Usage Restriction - Avaya P334T-ML Installation and configuration guid Installation And Configuration Manual

Chapter 3

Approved SFF/SFP GBIC Transceivers

The SFF/SFP GBIC (Gigabit Interface Converter) have been tested for use with the
Avaya
P334T
transceivers, see: www.avayanetwork.com/
SFF/SFP GBIC transceivers are hot-swappable.

Safety Information

The SFF/SFP GBIC transceivers are Class 1 Laser products. They comply with
EN 60825-1 and Food and Drug Administration (FDA) 21 CFR 1040.10 and 1040.11.
The SFF/SFP GBIC transceivers must be operated under recommended operating
conditions.

Laser Classification

CLASS 1
LASER PRODUCT
Class 1 lasers are inherently safe under reasonably foreseeable conditions of
operation.
Caution: The use of optical instruments with this product will increase eye hazard.

Usage Restriction

When a SFF/SFP GBIC transceiver is inserted in the module but is not in use, the
Tx and Rx ports should be protected with an optical connector or a dust plug.
Caution: Use only approved SFF/SFP GBIC transceivers. All approved SFF/SFP
GBIC transceivers:
1) Are 3.3V. Do not insert a 5V SFF/SFP GBIC.
2) Use Serial Identification. Do not use a GBIC that utilizes Parallel Identification.
10
-ML Gigabit Ethernet ports. For a list of approved SFF/SFP GBIC
LUOKAN 1
LASERLAITE
KLASS 1
LASER APPARAT
Avaya P334T-ML User's Guide