Allowed Protocols; Allowed Protocols Introduction; Allowed Protocols Cli Commands - Avaya P334T-ML Installation and configuration guid Installation And Configuration Manual

Allowed Protocols

Allowed Protocols Introduction

With the Allowed Protocols feature, the network manager can determine the IP
protocols enabled on the switch. This feature can be used to block access to the
switch using specific IP protocols. Each protocol can be independently enabled or
disabled on the switch.
Enabling and disabling the Recovery Password protocol can only be done using
a direct console connection via the Console port.

Allowed Protocols CLI Commands

The following Allowed Protocols commands are available.
In order to...
Enable Telnet on the switch
Disable Telnet on the switch
Enable HTTP on the switch
Disable HTTP on the switch
Enable the switch agent to accept
ICMP redirect packets sent to it
Enable the switch agent to ignore
ICMP redirect packets sent to it
Enable SNMP on the switch
Disable SNMP on the switch
Enable SNMPv1 switch access
Disable SNMPv1 switch access
Enable SSH on the switch
Disable SSH on the switch
Enable Recovery Password on the
switch
Disable Recovery Password on the
switch
Avaya P334T-ML User's Guide
Chapter 8
Use the following command...
ip telnet enable
no ip telnet
ip http enable
no ip http
ip icmp redirect
no icmp redirect
snmp-server
no snmp-server
snmp-server community
no snmp-server community
ip ssh enable
no ip ssh
terminal recovery password enable
no terminal recovery password
User Authentication
55