Chapter 11
Avaya P330 Layer 2 Features
Multilayer Policy CLI Commands
The following table contains a list of the CLI commands for the Multilayer Policy
feature. The rules of syntax and output examples are all set out in detail in the P330
Reference Guide.
In order to...
Set the default action for a given
Policy List.
Create an access-list rule in a
specific Access List.
Set the source list, destination list,
and destination module for copying
an entire Policy List
Set the DSCP-to-COS mapping.
Based on range and action
parameters, system will apply
mapping to frames
Designates which original frame
fields influence internal queues
selection
Assign a name to a Policy List
Add the name of an owner to a
Policy List
Delete an access-list element or a
Policy List
Activate a Policy List
Deactivate a Policy List
Display the DSCP to CoS map of a
policy-list
Set the list cookie for a specific
policy list
Display an access-list
114
Use the following command...
ip access-default-action
ip access-list
ip access-list-copy
ip access-list-dscp operation
ip access-list-dscp trust
ip access-list-name
ip access-list-owner
no ip access-list
ip access-group
no ip access-group
show ip access-list dscp
ip access-list-cookie
show ip access-list
Avaya P334T-ML User's Guide