Supported Sfp Transceivers - Avaya 4900 Series Manual

SFP

Supported SFP transceivers

The following section provides specifications for the supported SFP transceivers.
1000BASE-T SFP specifications
The 1000BASE-T SFP provides gigabit Ethernet connectivity using a single eight-pin RJ-45
connector.
The 1000BASE-T SFP operates at 1 gigabits per second (Gbps). Only the ERS 5632 can operate at
tri-speeds, and program the 1000BASE-T SFP to operate at 1 Gbps, 100 megabits per second
(Mbps) and 10 Mbps speeds.
The part number for this model is AA1419043-E6.
The maximum current requirement of the SFP is 375 milliamperes (mA) at 5 volts (V).
The following table describes the 1000BASE-T SFP specifications.
Table 3: IEEE 802.3z 1000BASE-T SFP specifications
Parameter
Standards
Connectors
Cabling
Distance
1000BASE-SX (LC) SFP specifications
The 1000BASE-SX SFP transceiver provides 1000BASE-SX gigabit Ethernet connectivity at 850 nm
using multimode optical fiber. This SFP supports only full-duplex operation. The part number is
AA1419013-E5.
The following table describes standards, connectors, cabling, and distance for the 1000BASE-SX
SFP transceivers.
Table 4: IEEE 802.3z 1000BASE-SX (LC) SFP specifications
Parameter
Connectors
Cabling
Distance
Wavelength
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Specifications
IEEE 802.3z, IEEE 802.3ab
RJ-45
CAT5E or better UTP
Up to 100 m
Specifications
Duplex LC
• 62.5 µm MMF optic cable
• 50 µm MMF optic cable
• up to 275 m using 62.5 µm MMF optic cable
• up to 550 m using 50 µm MMF optic cable
850 nanometers (nm)
Series
Comments on this document? infodev@avaya.com
Table continues...
28