Avaya P334T-ML Installation and configuration guid Installation And Configuration Manual page 107

In order to...
Globally enable/disable 802.1x
Set dot1x control parameter per
port
Initialize port dot1x
Set the port to re-authenticate
Set dot1x re-authentication mode
per port
Set the 802.1x quiet period per port
Set the transmit period per port (a
time interval between attempts to
access the Authenticated Station)
Set the supp-timeout per port (a
time for the port to wait for a reply
from the Authenticated Station)
Set the server-timeout per port (a
time to wait for a reply from the
Authentication Server)
Set the re-authentication period per
port (an idle time between re-
authentication attempts)
Set the max-req per port (the
maximal number of times the port
tries to retransmit requests to the
Authenticated Station before the
session is terminated)
Avaya P334T-ML User's Guide
Chapter 11 Avaya P330 Layer 2 Features
Use the following command...
set dot1x system-auth-control
enable/disable
set port dot1x port-control
set port dot1x initialize
set port dot1x re-authenticate
set port dot1x re-authentication
set port dot1x quiet-period
set port dot1x tx-period
set port dot1x supp-timeout
set port dot1x server-timeout
set port dot1x re-authperiod
set port dot1x max-req
91