Syslog Configuration Cli Commands - Avaya P334T-ML Installation and configuration guid Installation And Configuration Manual

Syslog Configuration CLI Commands

Use the CLI commands briefly described below for configuring System Logging.
The rules of syntax and output examples are all set out in detail in the Reference
Guide.
In order to...
Enable or disable logging for the
current session
Define a filter rule for logging
messages for the current session
Display the logging configuration
for the current session
Define the IP addresses of the
Syslog servers
Delete a Syslog server from the
Syslog server table
Enable or disable logging for a
Syslog server
Define a filter rule for logging
messages for a Syslog server
Update the server facility
parameter of a configured Syslog
server
Defines the access level associated
with a Syslog server sink.
Display the logging configuration
for the specified Syslog server or for
all servers
Enable or disable logging to a file
on NVRAM
Define a filter rule for logging
messages to a file
Display the logging configuration
for the file sink.
Avaya P334T-ML User's Guide
Chapter 10
Use the following command...
set logging session {enable |
disable}
set logging session condition
show logging session condition
set logging server
clear logging server
set logging server {enable | disable}
set logging server condition
set logging server facility
set logging server access-level
show logging server condition
set logging file {enable | disable}
set logging file condition
show logging file condition
Switch Configuration
73