Avaya P334T-ML Installation and configuration guid Installation And Configuration Manual page 60

Chapter 8 User Authentication
In order to...
Return the SNMPv3 engine ID to its
default
Create an SNMPv3 user
Remove an SNMPv3 user
Create an SNMPv3 group
Remove an SNMPv3 group
Create a view or add or exclude
OIDs from a view
Delete an SNMPv3 view
Set a read/write/trap SNMPv1
community name
Display a list of SNMPv3 views
Display a table of SNMPv3 users
and the groups with which they are
mapped
Display the SNMPv3 engine ID
Display a list of SNMPv3 groups
Display a list of SNMPv3 users
Display a list of SNMPv3
notification receivers and SNMPv1
trap receivers
Enable or disable link up/link
down notifications and traps
Define SNMPv1 trap receivers or
configure the SNMPv1 traps sent
by the device
Removes SNMPv1 trap receivers
Enable or disable SNMPv1 traps for
authentication failures
44
Use the following command...
no snmp-server engineID
snmp-server user
no snmp-server user
snmp-server group
no snmp-server group
snmp-server view
no snmp-server view
set snmp community
show snmp view
show snmp userToGroup
show snmp engineID
show snmp group
show snmp user
show snmp
set port trap
set snmp trap
clear snmp trap
set snmp trap enable/disable auth
Avaya P334T-ML User's Guide