Avaya P334T-ML Installation and configuration guid Installation And Configuration Manual page 83

In order to...
Download a startup configuration
file to the device using TFTP (only
applicable when the device mode is
Layer 2)
Download a module configuration
file to the device using TFTP
Download a stack configuration file
to the device using TFTP
Download embedded software
using TFTP
Download embedded Web
software using TFTP
Download PoE software using
TFTP
Upload the startup configuration
file from the device using SCP (only
applicable when the device mode is
Layer 2)
Upload a module configuration file
from the device using SCP
Upload a stack configuration file
from the device using SCP
Upload the running configuration
file from the device using SCP (only
applicable when the device mode is
Layer 2)
Upload the startup configuration
file from the device using TFTP
(only applicable when the device
mode is Layer 2)
Avaya P334T-ML User's Guide
Chapter 10
Use the following command...
copy tftp startup-config
Note:To use the startup
configuration file, run the
copy running-config
starting-config command
after the configuration file is
downloaded to the device.
copy tftp module-config
copy tftp stack-config
copy tftp sw_image
copy tftp ew_archive
copy tftp sw_powerinline_image
copy startup-config scp
copy module-config scp
copy stack-config scp
copy running-config scp
copy startup-config tftp
Switch Configuration
67