Changed Cli Commands; Corrected Problems - Avaya Cajun P550R Release Notes

Enhancements

Changed CLI Commands

Corrected Problems

610-0184-095
The following events are now logged in the event log:
Saving the running configuration to the startup configuration
Creating an IP interface
Modifying an IP interface
Deleting an IP interface
The get Fabric_mode command replaces the get
Cajun_mode command.
The set Fabric_mode command replaces the set
Cajun_mode command.
The following problems have been corrected in this release:
Pulling the base port on a hunt group no longer causes traffic
to lose duplexity and broadcast to all ports within the VLAN.
The SNMP error message no longer displays when you
perform a LOADMIB operation.
You can now create a row in the GenAppFile table in the
LOAD MIB.
A software modification has been implemented for the LEDS
on the 24-port, 10/100 Ethernet module with RJ45
connectors. The LEDs no longer illuminate when nothing is
connected to them.
The switch no longer stops learning remote MAC addresses
over the ATM link when 36 or more virtual switch ports
(VSPs) are configured.
When running AppleTalk Network Assistance, the switch no
longer stops forwarding layer 3 traffic.
June 14, 2001
17