Configuring Outgoing Calls From Bcm50 To At&T Ip Flex Reach; Figure 19: Configuring Did For Outgoing Calls - Nortel BCM50 Release 3.0 SIP Configuration Manual

AT&T IP Flexible Reach Service
Nortel BCM50 Release 3.0 SIP Configuration Guide
4.6 Configuring Outgoing Calls from BCM50 to AT&T IP Flex Reach
Configuration Telephony Sets All DNs:
We will now associate the private DN number with the DID number. In the
example below; 2000 is entered in the "Private OLI" field and 7323683478 is
entered in the "Public OLI" field. This example enables "calling number
translation" (outgoing) for this particular DN number. See figure below.

Figure 19: Configuring DID for Outgoing Calls

© 2007 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T
logo and all other AT&T marks contained herein are trademarks of AT&T
Intellectual Property and/or AT&T affiliated companies. All other
marks contained herein are the property of their respective owners.
Issue 0.7 Page 26 of 37