Figure 22: Assign Line Pool To Ip Sets - Nortel BCM50 Release 3.0 SIP Configuration Manual

AT&T IP Flexible Reach Service
Nortel BCM50 Release 3.0 SIP Configuration Guide
Additionally, all telephone sets that need to access the VoIP trunks needs to be
configured with the designated "Line Pool" code. In our example we defined
"BlocA" as the code to access the VOIP trunks. See figure 19 below.

Figure 22: Assign Line Pool to IP Sets

© 2007 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T
logo and all other AT&T marks contained herein are trademarks of AT&T
Intellectual Property and/or AT&T affiliated companies. All other
marks contained herein are the property of their respective owners.
Issue 0.7 Page 29 of 37